NCS-FI10MA-153A Type and functional characteristics

The NCS-FI10MA-153A is NIKKI DENSO NCS-FI servo drive,NCS-Fi/FS models are servo drives with single-axis control.

Driver type:
 
NCS-FI1/FS1
Fixed -point control
1 Axis positioning or single -axis independent control in the multi -axis system
 
Ncs-fi2/fs2
Integrated control
Integrated control service of the servo drive NC sequence controller is a single axis or small mechanical system
 
Ncs-fi3/fs3
Itinerary positioning control
Cut the roller steps, which can control the itinerary of a specific length.  
 
Ncs-fi4/fs4
Synchronous control
Synchronous control of 1 axis and production lines during pulse adjustment
 
Ncs-fi5/fs5
Free curve control
The Z -axis synchronization spindle and complete the three -dimensional Z -axis motion of continuous positioning and free curve motion can also be completed. In addition, the parameters can be set to synchronize the cycle
 
Ncs-fi6/fs6
Torque tension control
Set the material parameters, calculate the specific value by the controller, and perform tension control.

Leave a comment

Please note, comments must be approved before they are published