https://rockssautomation.com/blogs/news.atomRockss Automation - News2024-03-13T10:18:32+08:00Rockss Automationhttps://rockssautomation.com/blogs/news/heidenhain-control-system-overview2024-03-13T10:18:32+08:002024-03-13T10:18:33+08:00HEIDENHAIN control system overviewGuoYaqin
HEIDENHAIN control system with a modular inverter system typically consists of the following components:
• MC main computer, monitor, keyboard, and machine operating panel • PLB 62xx FS or PLB 62xx system PL and PAE-H 08-00-01 • CC 3xx controller unit • UVR 3xx power supply unit • UM 3xx modular inverters • KDR 3xx commutating reactor • Line filter for the UVR 3xx • Siemens SITOR gR or gS line fuse • UP 3xx braking resistor module (if necessary) • Surge protector (if necessary) • SM 3xx voltage protection module (if necessary) • CMH 3xx capacitor module (if necessary) • Shielded motor power cables • Feed and spindle motors
The Gen 3 drives are notable for the following features: • Higher peak and nominal currents with a more compact enclosure • Fast Gbit HSCI communication all the way to the UVR 3xx power supply unit, for greater flexibility and improved diagnostics • Digital HFL (HEIDENHAIN Fiber Link) cable for control of the inverters, for faster and interference-free data transfer • Contiguous bus mounting for supply voltages (DC link, 24 V),allowing for very simple wiring and any arrangement or sequence of the power supply unit, power modules, controller unit, and main computer • Hybrid connector for the connection of motor phases, the brake,and the shield with a single connecting element • New, miniaturized connector technology for the connection of purely serial EnDat encoders]]>
https://rockssautomation.com/blogs/news/about-1394c-sjt22-d-servo-controller2024-03-09T11:26:19+08:002024-03-09T11:26:20+08:00About 1394C-SJT22-D Servo ControllerGuoYaqin
1394C-SJT22-D is part of the Allen-Bradleyservo controller series and it possesses a rated input voltage of 324 to 528 Volts AC for unanticipated and deliberate power variance. The 1394C-SJT22-D runs on three-phase power at 50 to 60 Hertz. It has 33.8 Amps of continuous DC output current during operation. It produces 17 kW of continuous output power if the primary voltage is 380 Volts and 22 kW if the primary voltage is 460 Volts. The 1394C-SJT22-D has a peak power output of 136 kW, a capacitance of 660 µF, and an inductance of 500 µH, but no internal shunt resistor. Among the additional system module features of the 1394C-SJT22-D are the following: a connector for input power termination, a cable clamp for strain relief and shield bonding, and Smart Power for soft-starting a power monitor.
The 1394C-SJT22-D is an interchangeable multi-axis motion controller with terminations, EMI filtering, and smart power series enhancements. The 1394C-SJT22-D can act as a velocity or torque controller with the Allen-Bradley SERCOS Interface Module. It provides a direct line connection or transformerless contact for 360 and 480-volt three-phase input power. The 1394C-SJT22-D has IGBT power conversion and slide-and-lock module connection.]]>
https://rockssautomation.com/blogs/news/about-1336f-mcb-sp1k-1336f-drives-pcb2024-03-08T14:06:26+08:002024-03-08T14:06:27+08:00About 1336F-MCB-SP1K 1336F drives PCBGuoYaqin
1336F-MCB-SP1K board is a drive control board that has been manufactured and distributed by Allen-Bradley/Rockwell Automation and it comes in the spare parts catalog of the Allen-Bradley 1336 Plus II series. The main equipment of this series is the adjustable frequency AC drive that controls and operate dynamic motors. Dynamic motors, or variable speed motors are motors that require variable speed and torque and also the control of motor loads. There may be intervals of rest between operations. These drives can provide the control needed for an application by ensuring that the motor has soft stops and deceleration processes instead of sudden stops that will cause machine wear and damage. The 1336F-MCB-SP1K drive control board is an important machine part since it is where all the electrical connections are embedded and made.
The Allen-Bradley/Rockwell Automation 1336F-MCB-SP1K drive control board is located inside the drive and attached to a series of jumpers at Pins 3 and 4 and 17 and 18 of the jumper known as J2. When these jumpers are disconnected, these will need to be installed when the new connection has been made. It is important to recall that electronic circuitry is fragile and it must be treated and installed carefully. Since the Allen-Bradley/Rockwell Automation 1336F-MCB-SP1K drive control board is located inside the drive, it will be protected by the same enclosure as the drive and it will receive as much ventilation as the environment enables it to. The drive needs to be installed in a clean location with a temperature below 40 degrees Celsius. Clearances are required on each side of the drive to dissipate heat.]]>
https://rockssautomation.com/blogs/news/description-of-allen-bradley-1394-sjt05-c2024-03-07T14:22:01+08:002024-03-07T14:22:02+08:00Description of Allen-Bradley 1394-SJT05-CGuoYaqin
Allen-Bradley 1394-SJT05-C is a standard GMC System module that functions similarly with 1394C-JST05-L.The input requirements for this system module are 3-Phase,380/460 Volts,with 50/60 Hz frequency,and current of 6.5 amperes.The output voltage of this system module is 530/680V DC along a continuous power output of 4/5 kilowatts with peak power of 28 kW.The continuous current output is 7.36 A and peak current of 15.0 amperes.
This module is compatible with Allen-Bradley secondary protection device with part number 1492-CB3-H300.Up to Four (4) axis modules may be configured using any combination of combination of AM03 and AM04.Combination of AM03, AM04,and AM07 may also be used however,this system module does not support more than Two (2) AM07 axis module.Other combination of axis module is not recommended and may result to false tripping during power up caused by an increased inrush current.
The rated power dissipation of this system module are 66 Watts @ 20%, 70 Watts @ 40 Watts,73 Watts @ 60% 77 Watts @ 80% and 80 Watts @ 100% Power output. This system module dissipates an additional power.The maximum additional dissipation is 200 Watts while most applications use less than 10% of the capacity.
An equivalent parameter definition must be set within the servo system.This system module must be declared correctly by accessing parameter [System Type] to define the catalog number of system module. This definition is specifically accessed through Parameter 14,Parameter Group Configuration,Option No.1 1394-SJT05-C.]]>
https://rockssautomation.com/blogs/news/allen-bradley-1336f-b125-aa-en-drive-overview2024-03-06T10:53:17+08:002024-03-06T10:53:18+08:00Allen-Bradley 1336F-B125-AA-EN drive OverviewGuoYaqin
1336F-B125-AA-EN drive is a Allen-Bradley 1336F Plus II adjustable frequency AC drive. The drive features a Horsepower rating of 125 Horsepower, with a power rating of 380 Volts AC to 480 Volts AC. The Allen-Bradley 1336F-B125-AA-EN drive comes with the IP 20 NEMA type 1 enclosure and it features the insulated gate bipolar transistor (IGBT) brake. The IGBT brake provides the Allen-Bradley 1336F-B125-AA-EN drive a high switching speed that is necessary for PWM VFD operation. The Allen-Bradley IGBT brake comes with the capability of switching on and off several times in seconds. The IGBT brake is also important in order to minimize noise through its frequency switching capability.
The 1336F-B125-AA-EN drive features the dynamic current control and it achieves exceptional torque production through the sensorless vector control feature. It features the proactive current limit control for reduced tripping. The unit also has the ability to start low inductance motors, and it has isolated power and logic modules which eliminates noise and provides reliable and stable drive operation. The 1336F-B125-AA-EN drive features condensed packaging for allowing the drive to be easy to mount. The Allen-Bradley 1336F Plus II drives feature common assembly parts and this reduces the need for stocking several different parts. They also feature simplified drive programming because of their grouped element structures that allow for quick access to all of the related functions. The Allen-Bradley 1336 Plus drives like the 1336F-B125-AA-EN drive support an easy-to-read supertwist LCD screen that supports up to 32 characters of text. The screen serves as a programming interface and it also has a drive monitoring interface.]]>
https://rockssautomation.com/blogs/news/specifications-for-allen-bradley-1336-bdb-sp76d-pcb2024-03-05T15:14:22+08:002024-03-05T15:14:22+08:00Specifications for Allen-Bradley 1336-BDB-SP76D PCBGuoYaqin
Allen-Bradley 1336-BDB-SP76D is a PCB,gate drive,1336STEF with an F-frame.It has 460V and 450 HP of output. This 1336-BDB-SP76D base driver board is also an adjustable frequency drive that is a customizable replacement part for Allen-Bradley’s obsolete 1336-BDB-SP76A PCB gate drives.
The 1336-BDB-SP76D gate drive can be enclosed in a NEMA 1, 4, or 12 enclosure, both for protection and to support several analog, digital, blank, or programmer HIM (Human Interface Machines.) The 1336-BDB-SP76D’s enclosure can also take an EH2 locally-powered heater, an EH remotely-powered heater, EC filtered door openings, EG filters and gasketing, or a 12 or 14-inch floor stand. Users can customize the gate drive’s enclosure with 1, 2, or 3 special paint colors and an enclosure nameplate.
The 1336-BDB-SP76D communicates with other devices through a variety of possible DeviceNet and RS-232 ports. The possible DeviceNet ports are the GM5C port, the GM6C enhanced port, the GMS5C port, and the GMS6C enhanced DeviceNet port. The RS-232/422/485 DF1 port options include the GD2C and the GMS2C ports. The 1336-BDB-SP76D gate drive can also communicate through the GD1C, the GM1C, and the GMS1C single-point RIO ports.
There are dozens of options that users can choose from to customize their 1336-BDB-SP76D PCB gate drives. In addition to the enclosure and communication port options, users can choose different types of input and output reactors, motor heater controllers, line metering systems, analog I/O configurations, and RTD protection features. Some of the features have the option of running on remote power or on local power.
]]>
https://rockssautomation.com/blogs/news/allen-bradley-1336-bdb-sp42d-pcb-boards-description2024-03-04T10:39:11+08:002024-03-04T10:39:12+08:00Allen-Bradley 1336-BDB-SP42D PCB boards DescriptionGuoYaqin
Allen-Bradley 1336-BDB-SP42D PCB board belongs to the 1336 family of drives manufactured by Rockwell Automation.With its cutting-edge tech standards,it can meet all your speed control requirements.The current rating for the 1336-BDB-SP42D is 575 volts.You can use it for the precise and efficient speed control of a powerful motor with a horsepower rating of 250 HP.The 1336-BDB-SP42D caters to the advanced needs of people who want a speed control solution.
The 1336-BDB-SP42D Gate Drive PC Board is a cost-effective drive unit but it does not compromise quality or specifications. It comes with all the advanced specs which you will need to maximize the productivity of the machine along with increased ease of operation.
The 1336-BDB-SP42D is an adjustable frequency drive,and adjustable or variable frequency drives (VFDs) like the 1336-BDB-SP42D are used to ensure the safety and energy efficiency of the machine.
With this Allen-Bradley Gate Drive,you can make the motor start,accelerate,decelerate,or stop smoothly.Meanwhile,the user-friendly architecture facilitates quick installation and hassle-free operation.
You can customize your 1336-BDB-SP42D gate drive with a variety of I/O, HIM,bypass,switches,and enclosure options.For example,you can order an enclosure that is custom-painted in 1, 2, or 3 colors and which is labeled with a custom nameplate.The 1336-BDB-SP42D is UL panel-recognized.]]>
https://rockssautomation.com/blogs/news/allen-bradley-powerflex-755-ac-drives-designed2024-02-29T11:09:17+08:002024-02-29T11:09:18+08:00Allen-Bradley PowerFlex 755 AC drives designedGuoYaqin
The Allen-Bradley/Rockwell Automation PowerFlex 755 AC drives are designed to provide high performance, ease of use, and application flexibility. To provide these functionalities, the PowerFlex 755 drives support a variety of hardware and multiple control options as well as optional embedded safety capabilities. These drives are manufactured to be used on the industrial floor to control motors. The PowerFlex 755 drives can be interfaced with applications such as conveyors, pumps, and fans. For the AC drives to be interfaced with a variety of industrial communications networks, they support the integrated motion on EtherNet/IP modules that help to connect the PowerFlex 755 AC drives to linear, star, and ring topologies. The configuration parameters for these drives can be automatically downloaded onto replaced drives from Logix controllers through the Automatic Device Configuration feature.
Drives in the PowerFlex 755 series support different voltage and power ranges. For example, these drives accommodate a voltage of between 200 Volts AC and 240 Volts AC, 380 Volts AC and 480 Volts AC, or of 600 Volts AC, with the highest voltage rating being 690 Volts AC. Drives in the PowerFlex 755 series can be mounted in either IP 00, IP 20, NEMA/UL type open, flange-mounted, or IP 54 NEMA/UL type 12 rated enclosures. Additionally, the PowerFlex 755 AC drives support different types of control. The available control options include vector control with FORCE technology, Volts per Hertz control, permanent magnet motor control, and sensorless vector control. Note that the Allen-Bradley PowerFlex 755 AC drives accommodate pre-engineered power option bays that provide a cost-effective solution for popular power options. Drives in this family are programmed and configured by using DriveTools software, an LCD human-machine interface module, the Connected Components Workbench software, or the SP software. However, the LCD interface is an integral part of the PowerFlex 755 AC drives.]]>
https://rockssautomation.com/blogs/news/motorola-mvme162pa-344se-controller-configuration2024-02-27T10:24:42+08:002024-02-27T10:34:56+08:00Motorola MVME162PA-344SE Controller ConfigurationGuoYaqin
MVME162PA-344SE controller is a high-performance embedded controller specially designed for industrial applications. It provides advanced computing capabilities and reliable performance, making it suitable for various harsh tasks.
MVME162PA-344SE Part Number is 01-W3528F 60A,The Controller Configuration:
• 33MHz MC68040RC33A Processor with Floating-Point Coprocessor • Second-Generation Petra ASIC Chip • 512 KB of SRAM on Main Board • 1 MB of Flash Memory • (4) IndustryPack Ports • SCSI/Ethernet Interface • Serial Port B Interface: EIA-232-D (DCE) Serial Interface Module, Model Number: SIMM06]]>
https://rockssautomation.com/blogs/news/pacdrive-controller-family-overview2024-02-20T11:02:18+08:002024-02-20T11:02:19+08:00PacDrive Controller Family OverviewGuoYaqin
PacDrive Controller, microprocessor-based control hardware with the VxWorksreal-time operating system, centrally implements the PLC and motion functions. A Schneider PacDrive Controller synchronizes, coordinates, and creates the motion functions formaximum:
• 8 drives for the PacDrive Controller C200 • 2 drives for the PacDrive Controller C200 A2 • 16 drives for the PacDrive Controller C400 • 8 drives for the PacDrive Controller C400 A8 • 99 drives for the PacDrive Controller C600
of a food and packaging machine. Many different HMIs are used for the HMI tasks. Whether it is low-cost clear text orIPC, it is no problem for the flexible PacDrive Controller. The PacDrive P600 Controller is additionally equipped with a full-fledged PC. Due toits PC-based architecture, it can perform HMI tasks with no problem in addition to theusual motion functions.]]>
https://rockssautomation.com/blogs/news/c200-a2-controller-highlights-and-type-code2024-02-19T14:10:07+08:002024-02-19T14:10:08+08:00C200 A2 Controller highlights and Type codeGuoYaqin
PacDrive C200 Controller is the smallest controller solution that uses the real-time operating system VxWorks. VxWorks provides logic and motion functions for a pro-duction or packaging machine. A PacDrive Controller synchronizes, coordinates and generates the positioning functions for up to 8 servo drives, which are connected via the SERCOS bus interface.
Several standardized field bus interfaces are available: PROFIBUS DP, CAN, CAN-open or DeviceNet. A variety of standard HMI systems, ranging from low-cost text displays to industrial PCs, can be used for the HMI functions.
The highlights: • CPU: ST-PC VEGA, 128MB RAM • Real-Time operating system: VxWorks • IEC 61131-3 programming languages for PLC and Motion Control • SERCOS interface • Profibus DP, CAN, CANopen, DeviceNet, or Ethernet/IP • Fast Touchprobe inputs • Communication interfaces: RS 232, RS 485, Ethernet (TCP/IP) • CompactFlash™ card (≥128 MB) • Includes OPC server for Windows-based HMIs • Teleservice via web server or modem
C200/10/1/1/1/00 Type code: “10”HW-Variant “1”Processor 1=ST-PC VEGA “1”RAM 1=128 MB “1”Flash memory 1=32 MB “00”Optional functions]]>
https://rockssautomation.com/blogs/news/333299-a01-powerflex-750-series-product-overview2024-02-18T14:26:20+08:002024-02-18T14:26:21+08:00333299-A01 PowerFlex 750-Series Product OverviewGuoYaqin
333299-A01 is Allen-BradleyPowerFlex 750-Series Power Drive Board,The PowerFlex 750-Series is a robust family of AC drives that provide ease of use, flexibility, and performance for a variety of industrial applications.The PowerFlex 753 provides general purpose control for applications ranging up to 350 Hp and 250 kW. The PowerFlex 755 provides maximum flexibility and performance ranging up to 700 Hp and 450 kW.
Maximize your productivity by taking advantage of the following key features offered in the PowerFlex 750-Series:
• DeviceLogix™ – Embedded control technology that supports the manipulation of discrete outputs and drive control functions, while using discrete inputs and drive status information onboard the drive.
• Predictive Diagnostics – Allows the drive to keep track of information that affects the life of its cooling fans and relay outputs. The drive can also be programmed to monitor the run time hours for machine or motor bearings.
• Option Cards – Each drive has a slot-based architecture. Supported hardware control options are common for both products, to help reduce your inventory and spare parts requirements.
• Safe Torque-Off and Safe Speed Monitor – provides a choice for safety levels depending on your application requirements.
• Communications – The PowerFlex 755 comes with a built-in Ethernet port. Ethernet can easily be added to the PowerFlex 753 with a communication module.
• I/O – option cards are available for additional analog and discrete I/O. The PowerFlex 753 comes with built-in I/O that can also be easily expanded with option cards.
• Packaging – Factory and field installable enclosure options are available to meet most environmental requirements:Open Type and Flange Mount options to support Cabinet Mount requirements, Extra Protection Wall Mount for harsh environments, and supporting debris hoods and conduit plate kits.
• Standard Power Structure – a common power structure is shared to provide the same physical footprint and power range no matter what PowerFlex 750 -Series drive is used.]]>
https://rockssautomation.com/blogs/news/servostar-s300-servo-drive-features2024-01-30T12:00:04+08:002024-01-30T12:00:05+08:00SERVOSTAR S300 Servo Drive FeaturesGuoYaqin S300 Servo Drive Features: CE, UL, cUL Operation directly from grounded 115 to 480 VAC, 3-phase, 50-60 Hz lines Output current: 1.5 to 10 Amps RMS/phase, continuous With integral AC line filter, all shield connections terminate directly to the amplifier DC-link circuits can be connected in parallel Fully programmable via RS232 interface EtherCAT® and CANopen bus communication onboard Optional SERCOS II, DeviceNet, SynqNet, Profibus, or PROFINET RT Easy setup using a Windows-based graphical interface 230 V type suitable for 200 mm switchgear cabinets Interface integrated for stepper controllers, master-slave operation and electronic gearing Motion Control and Soft-PLC integrated Encoder emulation: choose incremental (A quad B, dec./bin.) or absolute (SSI, Gray/bin.)
Our factory supplies various KOLLMORGEN SERVOSTAR S300 Servo Drive in stock:303、306、310、341、343、346.]]>
https://rockssautomation.com/blogs/news/faq-for-2198-capmod-2240-kinetix-5700-module2024-01-23T10:05:01+08:002024-01-23T10:05:02+08:00FAQ for 2198-CAPMOD-2240 Kinetix 5700 moduleGuoYaqin
2198-CAPMOD-2240 is an Allen BradleyKinetix 5700 component module.
FAQ for 2198-CAPMOD-2240:
1. What is the rated capacitance of the 2198-CAPMOD-2240?
The 2198-CAPMOD-2240’s rated capacitance is 2240.
2. Can I install multiple capacitor module in a single Kinetix 5700 system assembly?
Yes. Multiple instances of 2198-CAPMOD-2240 is allowed.
3. What is the physical dimension of the 2198-CAPMOD-2240?
The 2198-CAPMOD-2240 measures 358 mm (14.09 in) (H) x 55 mm (1.08 in) (W) x 253 m (10.0 in) (D).
1. What are the LED status indicators available to the 2198-CAPMOD-2240?
The 2198-CAPMOD-2240 has DC bus and Module bus indicator LEDs.
2. Does the 2198-CAPMOD-2240 support zero stacking installation?
Yes. The 2198-CAPMOD-2240 supports zero stacking installation.
3. What is the maximum number of 2198-CAPMOD-2240 that can be installed to a Kinetix 5700 system?
The number of 2198-CAPMOD-2240 installation is limited only by the available space of the enclosure.]]>
https://rockssautomation.com/blogs/news/heater-describe-for-cvd-apparatus2024-01-19T15:26:29+08:002024-01-19T15:26:30+08:00Heater describe for CVD apparatusGuoYaqin
heater is used in a CVD apparatus. In the CVD apparatus, reactive gas is supplied through a reactive gas supply plate to a substrate on a substrate holder to deposit a film on the substrate, and a purge gas supply passage is formed by placing a shield mechanism around the substrate holder, the shield mechanism including a ring plate disposed close to the outer periphery of the substrate. During film deposition, purge gas supplied through the purge gas supply passage is blown off from a clearance between the substrate and the ring plate, thereby preventing a film from being deposited on the rear surface of the substrate or the like. A heating element is arranged in a space in the purge gas supply passage close to but not contacting the substrate holder. The heating element is preferably a ceramic heater.
Our factory supplies various lam research\applied materials CVD Device Heater in stock VAS104350-0415,etc.]]>
https://rockssautomation.com/blogs/news/2097-v34pr5-lm-2097-kinetix-350-drives-common-questions2024-01-18T14:59:11+08:002024-01-18T15:01:08+08:002097-V34PR5-LM 2097 Kinetix 350 Drives common questionsGuoYaqin
2097-V34PR5-LM is the Allen Bradley2097 Kinetix 350 Ethernet I/P Single Drives,it exhibits a 2.0 kWatts Power Rating, 5.7 Amperes Continuous Output Current (0-peak), and 480 Volts (AC), 3 Phase, Input Voltage.
What are the embedded communication ports integrated to the 2097-V34PR5-LM?
The 2097-V34PR5-LM has One (1) Ethernet port, One (1) I/O (IOD) connector, and One (1) Motor feedback (MF) connector.
Does the 2097-V34PR5-LM support integrated motion over Ethernet I/P?
Yes. The Ethernet I/P communication port supports integrated motion over Ethernet I/P.
What is the Power Dissipation of the 2097-V34PR5-LM?
The 2097-V34PR5-LM’s power dissipation is 58 Watts.]]>
https://rockssautomation.com/blogs/news/2711-t6c15l1-panelview-600-series-information2024-01-17T14:01:26+08:002024-01-17T14:01:26+08:002711-T6C15L1 Panelview 600 series InformationGuoYaqin
2711-T6C15L1 is Allen BradleyPanelview 600 series terminals,The Panelview 600 series is a series of standard operator terminals designed and built by Allen-Bradley. These operator terminals feature pixel graphics capabilities with displays that are color active-matrix TFT displays. The Panelview 600 terminals feature keypad and touchscreen operator input options, with units that support both input types together or keypads only for input. The display area measures 115 x 86 millimeters, while the resolution is 320 x 234 and 320 x 240 pixels. These units feature 128 touch cells and come with actuation ratings of 1 million presses. The Panelview 600 terminals also come with 10 function keys and they support real-time clocks that are battery-backed clocks and they support timestamps to provide critical data. The Panelview 600 terminals come with a replaceable battery and the application memory is 190 KB of application runtime memory with 240 KB of non-volatile memory.
The operator terminals feature optional ATA memory card support. The units come with pre-installed PanelBuilder32 software that runs on personal computers. The units support various communication ports such as the EtherNet/IP, DeviceNet, ControlNet, DH+, Remote I/O, DH-485, RS-232, and the DF1 ports. The Allen-Bradley Panelview 600 terminals also support the RS-232 printer port and they run on an input voltage of 18 to 32 Volts DC. The input voltage range is 85 to 264 Volts AC and the power consumption rating is 60 Volts maximum. The Panelview 600 terminals feature color or grayscale graphic displays and they are base-configured units. The communication ports provide add-on capabilities to the base-configured units with modular communication interfaces.]]>
https://rockssautomation.com/blogs/news/panelview-plus-7-performance-operator-interface2024-01-16T15:34:31+08:002024-01-16T15:34:31+08:00PanelView Plus 7 Performance Operator InterfaceGuoYaqin
Allen Bradley PanelView Plus 7 Performance HMI:
Machine builder and end user focus Sizes: 6.5”, 9”W, 10.4”, 12”W, 19” Stainless steel with conformal coating optionsavailable Dual Ethernet DLR connectivity Touch screen or keypad options Available in AC or DC No limitations IECEx and ATEX Zone 2/22 Rated on DC touchmodels
PanelView Plus 7 Performance USB Ports forquick upload anddownload tothe terminal New installation clampsprovide fast and simpleterminal installationand removal Embedded dualEthernet port with DLRconnectivity SD storage card slot fordata storage andterminal replication]]>
https://rockssautomation.com/blogs/news/6180p-1200p-and-1500p-performance-and-standard-models2024-01-15T15:31:07+08:002024-01-15T15:32:38+08:006180P 1200P and 1500P Performance and Standard ModelsGuoYaqin
Allen-Bradley 1200P and 1500Pindustrial computers from Rockwell Automation, allow you torun visual interface, maintenance,control and basic informationapplications all from one machine.
Take advantage of easiermaintenance of your computerwith lockable front accessible USBports and power switch, plus twohot swappable hard disk drive bays.A higher temperature rating of 55˚C provides even more reliability inharsh environments.
Use the 1200P or 1500P computer with its integrated full alphanumeric keypad and programmable function keys to control machineryor a process; display information necessary to repair, maintain orstart up a process; and gather basicproduction information for making informed business decisions. To meetyour various application needs, the1200P and 1500P Integrated DisplayComputers with keypad are bothavailable in standard or performance models. The standard model providesthe computing power necessary formost visual interface, maintenance,or basic information applications.However, if more computing poweris needed, the performance model’sincreased RAM and processing capacity provides an eff ectiveal ternative to the standard model.
The 1200P and 1500P Integrated Display Computer with keypads include the following tools and services to provide reliable computing power on the factory floor: • Quick delivery • Complete package for immediate startup • System diagnostics-support CD • Cloning utility-accessory CD • Pre-registered software licensing • Application interoperability • Global sales and support • Immediate exchange • Technology change management • Rugged yet cost-eff ective platforms for today’s demanding factory environments Plus, our industrial computers are built to complement the suite of Rockwell Software®solutions.By utilizing a complete Rockwell Automation solution-hardware andsoftware-you are assured complete application support by an industry leader.]]>
https://rockssautomation.com/blogs/news/technical-specifications-for-1762-l40awa-controller2024-01-13T15:04:02+08:002024-01-15T15:22:38+08:00Technical Specifications for 1762-L40AWA controllerGuoYaqin
1762-L40AWA is a Allen-BradleyMicroLogix 1200 series programmable controller.Let's share below Technical FAQ for 1762-L40AWA:
What is the maximum controlled load of 1762-L40AWA?
The maximum controlled load for 1762-L40AWA is 1440 VA.
What is the operating frequency of 1762-L40AWA?
The operating frequency is 47 to 63 Hertz.
What is this module’s input power?
This module has an input power around 120 to 240 Volts AC.
Does the 1762-L40AWA has trim potentiometers?
Yes. This controller has Two (2) Trim potentiometers.
Does the 1762-L40AWA support I/O expansion?
Yes. Up to Six (6) 1762 Expansion I/O modules may be installed with this controller.
Can use the trim potentiometers to control the process?
Yes. With proper programming, it may be used to locally modify variables and eventually control the process however, it is not recommended if the intended modification is very frequent as the trim potentiometer may easily deteriorate. Use the trim potentiometers as secondary or tertiary adjustment options.]]>
https://rockssautomation.com/blogs/news/analyze-the-development-characteristics-of-xian-semiconductor-industry2024-01-12T13:58:45+08:002024-01-12T14:03:04+08:00Analyze the development characteristics of Xi'an semiconductor industryGuoYaqin From the perspective of the industrial chain, Xi'an has formed subdivided industries such as integrated circuits, smart terminals, electronic components, new display, photoelectric chips, and new electronic materials, and gathered thousands of upstream and downstream enterprises.
The entire Xi'an semiconductor industry is divided into several layers:
As the upstream link of the industrial chain, IC design brings together many well -known enterprises in Xi'an. At present, Xi'an has attracted more than 120 semiconductor design companies such as ZTE Keris, Huawei, Ziguang Guoxin, Taklewei, etc. These enterprises have important influence in the country and even the world. Many areas such as networking. It is worth mentioning that Xi'an's IC design level has reached the international advanced level, and the most cutting -edge design has reached 7nm process, and at the same time, the SOC chip design and development of the 10nm industrial platform is underway.
In the midstream link of the industrial chain, IC manufacturing companies play an important role. Xi'an has 8 companies including Samsung, Xiyue Electronics, Wei Guang, and Pai Rui in terms of wafer manufacturing. The size of Samsung ranks first among the national wafer manufacturing industry. The wafer manufacturing technology of these enterprises has reached the leading level in China. The highest technology products are 12 -inch 14nm memory.
As for the downstream links of the industry chain, Xi'an brought together 13 IC packaging companies, such as Samsung, Huatian, Licheng, Huayi, etc. In addition, Xi'an also has 10 testing and analysis centers. It is worth mentioning that Huatian is ranked sixth in the world and ranks third in China. Its products cover multiple fields such as integrated circuit packaging, advanced sensor packaging, power devices and smart power modules.
In terms of supporting industry, more than 70 companies including Yisi, Polytechnic Crystal, Tangjing quantum, and Geely Electronics are provided to provide key support services for the entire semiconductor industry chain. In addition, the industrial chain support of core enterprises such as Samsung has formed a scale effect, providing strong support for the further development of Xi'an semiconductor industry.]]>
https://rockssautomation.com/blogs/news/mvme3100-single-board-computer-advantage2024-01-11T15:37:57+08:002024-01-11T15:37:58+08:00MVME3100 single-board computer AdvantageGuoYaqin
MVME3100 single-boardcomputer (SBC) gives additionalperformance while protectingyour investment.
System-on-chip NXP MPC8540 withPowerPC® e500 processor core, integratedmemory controller, DMA engine, PCI-Xinterface, Ethernet and local I/O
Two Gigabit Ethernet ports plus anadditional 10/100BaseTX port
Up to 512MB of DDR333 ECC memory
USB 2.0 and Serial ATA controllers forintegrating cost-effective peripherals
2eSST VMEbus protocol offeringinteroperability with products such as theMVME6100 at higher bandwidths
Dual 33/66/100MHz PMC-X sites forexpansion via industry standard modules,support for processor PMCs and PMCspan
MVME721 direct-connect rear transitionmodule (RTM) for I/O routing through rear ofcompact VMEbus chassis]]>
https://rockssautomation.com/blogs/news/mvme147-vme-single-board-computer-composition2024-01-10T14:16:10+08:002024-01-10T14:16:11+08:00MVME147 VME Single-Board Computer CompositionGuoYaqin
MVME147 series is a family of VMEbus single-board computers. The on-board resources and peripheral controllers eliminate the need for additional modules in the VMEbus backplane thus reducing costs and freeing up valuable bus slots for additional functions.
♦ 16, 25, or 33.33 MHz MC68030 enhanced 32-bit microprocessor
♦ 16, 25, or 33.33 MHz MC68882 floatingpoint co-processor
♦ 4, 8, 16, or 32MB of shared DRAM, with programmable parity
♦ 4K x 8 SRAM and time-of-day clock with battery backup
♦ Four 28/32-pin ROM/PROM/EPROM/EEPROM sockets, 16 bits wide
♦ A32/D32 VMEbus master/slave interface with system controller function
♦ Four EIA-232-D serial communications ports
♦ Centronics® compatible printer port
♦ Two 16-bit timers and watchdog timer
♦ SCSI bus interface with DMA
♦ Ethernet transceiver interface
♦ 4-level requester, 7-level interrupter, and 7-level interrupt handler for VMEbus
♦ On-board debugger and diagnostic firmware]]>
https://rockssautomation.com/blogs/news/applied-materials-p5000-pecvd-description2024-01-09T17:17:53+08:002024-01-09T17:17:54+08:00Applied Materials P5000 PECVD DescriptionGuoYaqin
Applied Materials (AMAT) P5000 PECVD & Etch Back, 150mm Powers Up Working
-Mark II Mainframe, 21 Slot VME
-Qty 3 PECVD Chambers (Plasma Enhanced Chemical Vapor Disposition).
-Qty 1 Etch-Back
-Wafer Size 150mm
-Includes Hot Box, with Ampules
-Fully populated gas panel
-Processes (oxide, nitride, teos, sih4)
-Includes vacuum pumps, dry type, ebara
-Includes AMAT heat exchanger
-Includes Neslab chiller
-Includes Ozone Generator
-Includes Remote Frame with Qty 3 ENI OEM RF generators
We can sell P5000 Equipment disassembly accessories and various board cards,0100-00396, etc.]]>
https://rockssautomation.com/blogs/news/powerflex753-pn-337071-drive-board-designed2024-01-08T16:14:29+08:002024-01-08T16:14:30+08:00PowerFlex753 PN-337071 Drive Board DesignedGuoYaqin
PN-337071 is the PowerFlex 753 AC drive Board,Designed for general purpose applications, the PowerFlex 753 AC drive offers multiple options and features along with theadded benet of simple integration.The PowerFlex 753 comes standard with built-in I/O making it a cost eective solutionideal for OEMs and system integrators looking to reduce engineering costs, deliver machines to market faster and meet enduser demand for more productive and safer machines.
PowerFlex 753 at a glance
Ratings:380…480V:600V:690V:0.75…250 kW / 1.0…350 Hp / 2.1…456 A1.0…300 Hp / 1.7…289 A7.5…250 kW / 12…263 A
Motor Control: • V/Hz Control• Sensorless Vector Control• Vector Control with FORCE Technology(with and without encoder)• Interior Permanent Magnet with and withoutencoder
Enclosures: • IP00/IP20, NEMA/UL Type Open• Flange Mount• IP54/NEMA/UL Type 12
Features: • Predictive Diagnostics• Adjustable Voltage Control• Three option slots for I/O, feedback, safety,auxiliary control power, communications• Indexing• Pump Jack and Pump Off for oil wellapplications• Pjump and Traverse for Fibers application• Conformal Coating• DC Link Choke• Automatic Device Configuration
Requires Dual-port EtherNet/IP Option Module (Cat. No. 20-750-ENETR),firmware V7, Studio 5000 Logix Designer, and Drive Add-On ProfilesVersion 4.04 or higher.
]]>
https://rockssautomation.com/blogs/news/seriplex-intelligent-wiring-system-product-information2024-01-06T14:24:50+08:002024-01-06T14:24:51+08:00SERIPLEX Intelligent Wiring System Product InformationGuoYaqin
SERIPLEX CPU Interface Cards allow software runningon a host computer to control and monitor sensors andactuators through a SERIPLEX control bus. These cards actas masters for a SERIPLEX bus, monitoring for bus faultconditions as well as exchanging input and output signals withI/O devices. The cards interact with the computer through a 2-kbyte memory interface, so that detailed knowledge of SERIPLEX protocol is not required to program the card.
Key Features:
•PC (ISA), PC/104, and VME interface cards
•Capacity of 7680 discrete or 480 16-bit analog signals
•Full selection of SERIPLEX bus parameters
•Full SERIPLEX data error detection:
—Digital Debounce for discrete input signals
—Complementary Data Retransmission (CDR) for analogand multi-bit signals
•2-kbyte dual-port RAM memory interface to host for fastresponse and simple software interface
•Includes program-development aids on CD-ROM:
—C-language programming library
—Windows NT low-level driver, with Control Panelconfiguration utility
—Programmer’s Guide manual
•Software drivers available from several leading control andMMI software vendors
•Advanced programming features:
—Host watchdog monitor
—Heartbeat indication
—Hardware interrupts to support exception-drivenprocessing
—32-character text indication of card and bus status
—Product identity and firmware version available in memory
•Auto Restart and other configurable responses to bus faults
•Special card operating modes:
—Monitor mode reportsinputs but disables outputs
—Emergency State modepresets all outputs toknown states
—Data Pass-Through letsinputs directly controloutputs without hostintervention]]>
https://rockssautomation.com/blogs/news/cdn49-high-density-card-io-for-can-anddevicenet%E2%84%A2-networks2024-01-05T14:08:32+08:002024-01-05T14:08:32+08:00CDN49 HIGH DENSITY CARD IO FOR CAN ANDDEVICENET™ NETWORKSGuoYaqin
The CDN49x product line(CDN491) provides high density, compact and economical I/O solutions forpopular CAN and DeviceNet™ Fieldbus Networks. A variety of models are available with amix of digital I/O, analog inputs, and analog outputs. These robust I/O cards are at home infactory automation and process applications. For a complete solution, these cards areintegrated into customer or MKS designed assemblies for a best-fit solution to any highdensity I/O requirement. Cards are physically compliant to 3U CPCI. To ensure an idealinstallation fit, final signal distribution is available through high density D-sub connectors,or any customer requested method. Specific attributes of the CDN49x configurations include:
Fieldbus:CAN and DeviceNet™ Networks
DIDO:48 digital I/O points (optically isolated), each can be used as either an inputor an output
Combo:Combination of 24 digital I/O points, 8 analog input points, and 8 analogoutput points
AIAO:32 analog input points and 16 analog output points
Feat ur es & B enef it s:
•High density analog, digital, orcombination of field I/O points in acompact and economical package
•Flexible integration into existing or newDeviceNet networks
•Semi SIG compliant DeviceNetobject models
•Digital I/O points individuallyconfigurable for input or output
•Each digital output can be read back asan input to verify signal integrity
•All outputs forced to safe state whenpower degrades or networkcommunication is lost
•Analog input points are single-ended,12-bit resolution, configurable for 0-10Vor ±5V input ranges per channel
•Analog output points are single-ended,12-bit resolution, ±10V output range
•Easy to install and configure
•Rotary switches for network addressand jumpers for data rate; also can beset via backplane
•Standard NET and MOD bicolor statusLED indicators, plus model-specific I/Ostatus LED indicators
•Network communication is isolated fromall I/O
•High density 110 pin I/O connector, CPCIJ2 compliant]]>
https://rockssautomation.com/blogs/news/kollmorgen-s6000-series-features2024-01-04T16:47:15+08:002024-01-04T16:47:16+08:00Kollmorgen S6000 Series FeaturesGuoYaqin
Kollmorgen S6000 drive offers the following features: • Dial selectable motor current settings (0-6.0 Amps) • 0.0-8.0 amp version available for NEMA 42 and larger applications • 8 Amp versions include a factory installed fan kit • Dial selectable motor inductance setting (2-60mH) • Eight dial selectable motor resolutions (200-25,400 steps per revolution) • Selectable waveform (Pure sine, or -4% 3rd harmonic) for optimum smoothness/step accuracy • Selectable auto-standby current reduction to reduce drive and motor heating • Selectable anti-resonance compensation provides more usable motor torque • Front panel adjustments for motor inductance and phase offsets • Selectable step input format (Step & Direction, or CW & CCW) • Internal power dump for regenerative applications • Optional external power dump module (RPACK-1) available for large regenerative applications • Integral thermal protection (shuts down at 70°C on heatsink) •Interlocked motor connectors disable the drive if motor is disconnected duringoperation • Front panel diagnostic indicators for power, regen, over temperature, over voltage,short circuit, open interlock, step signals being received, disabled, and fault condition • Optically isolated fault output, to inform your motion controller of a fault condition • PWM, three state current control reduces motor heating • Isolated switch mode power amplifier is highly efficient and emits less EMI than mostdrives. • Full short circuit protection of motor outputs prevents drive failure due to damaged ormis-wired motors • AC power input, 85-135 VAC, 50/60 Hz • Internally fused power input • Integral heatsink (1°C/Watt) • Optional fan kit (-FK1 option) mounts to heatsink for high current or high ambienttemperature applications • All connections on removable screw terminals for easy wiring • Compact 2.5 x 9 inch footprint, 5.9 inches deep. Same size for single or dual-axisversions]]>
https://rockssautomation.com/blogs/news/evs9329-es-controller-nameplates2024-01-03T17:25:43+08:002024-01-03T17:25:43+08:00EVS9329-ES controller nameplatesGuoYaqin
EVS9329-ES is lenze 9300 Series Controller,These Instructions are only valid for 93×× controllers with the following nameplates:
type:EVS93××
design:E=enclosure ip20;C=Cold Plate
Technology: I=to IEC 1131 K=Cam profiler P=Positioning controller R=Register controller S=Servo inveter V=Vector control]]>
https://rockssautomation.com/blogs/news/fc-35d-advanced-power-and-excellent-expandability2024-01-02T15:01:56+08:002024-01-02T15:01:56+08:00FC-35D Advanced power and excellent expandabilityGuoYaqin
NEC Industrial Factory Computer:Model configuration that matches the application Two models are available: WindowsNT® Workstationver4.0 pre-installed model (FC-35DMODELSN) * and OS not attached models (FC-35DMODELSB) with network interface (100BASE-TX/10BASET) as standard equipment. You can choose the model according to the OS and usage environment you will use.
Powerful processing capacity by high -speed CPU The CPU adopts Pentium®Ⅱ processor (350MHz) and is a system bus 100MHz. Second cache is 512KB as standard. The Users Memory adopts SDRAM (with ECC function) that speeds up the memory continuous access to the CPU clock, with 64MB (FC-35DMODELSN) or 32MB (FC-35DMODELSB) as standard, up to 768MB. You can extend to. In addition, the 128 -bit window accelerator with a video acceleration function is also standard equipment. It can also support Windows NT ® and Windows ® 98.
Advanced expandability Various interface boards and extension slots for PIO boards, which are indispensable for FA/LA applications, are standard on PCI x 1, ISA x 1, PCI/ISA x 4 (full size support). It is possible to build a system that matches user. The keyboard/mouse interface also supports PS/2 interfaces in addition to USB.
Various files composition with excellent flexibility You can freely select the optimal file configuration according to the usage environment, usage, and data volume. Floppy Disc drive: 3.5 -inch floppy disc drive of 3 mode (1.44MB/1.2MB/720KB) is equipped with one drive standard. HDD-only drive bay: Fixed disk drive (2GB: FC-HD2000HS) or silicon disk drive (40MB: FC-SD40HS) can be implemented. Silicon disks have no mechanical movements in file access and are less likely to be affected by temperature and vibration, further improving their environment. Front access type drive bay: Fixed disk drive (2GB: FC-HD2000HF) or mirroring disk knit (2GB: FCMD2000HF) with improved operability. File Bay: By installing an optional HD adapter (FC9821XA-E01R), you can implement a mirroring disc unit (2GB: FC-9801-MD3) (Note 1). In addition, a commercially available 5-inch size file device such as a CD-ROM drive can be implemented.]]>